Troubleshooting guide

Hardware configuration  39
How to configure S-S Technologies cards
This section provides information on how to configure S-S Technologies cards.
5136-SD (Revision 1)
This card provides an interface from a PC bus to a Data Highway (DH) and Data
Highway Plus (DH+) network. There are two revisions to this card. Revision 1
has eight switches. Revision 2 has six switches.
For more information on the 5136-SD (Revision 1 and 2), please refer to 5136-SD
User’s Guide, publication SDMS.DOC.
Factory default IRQ setting of 5
and I/O Channel Address of 250
ON
OFF
123456
Switches
78
Enable
Transmit
Enable/Disable
Jumper