Troubleshooting guide

Hardware configuration  33
Base Memory Address for the Series A card
IMPORTANT
Do not mix 8-bit and 16-bit cards within a 64K segment boundary.
A 1784-KT (series B) card cannot be placed in the same segment
range of D000-DFFF or C000-CFFF. The 8-bit card may not work
in this setup. The two cards, 1784-KTC (series A) (16-bit) and 1784-
KT (series B) (8-bit), can be placed with one in the C000-CFFF
range and one in the D000-DFFF range.
SW-1 SW-2 Base Memory Address
SW-2 SW-1
Switch Switch
Base
Memory
Address
1 21234
C000 DOWN DOWN DOWN DOWN UP UP
C400 UP DOWN DOWN DOWN UP UP
C800 DOWN UP DOWN DOWN UP UP
CC00 UP UP DOWN DOWN UP UP
D000 DOWN DOWN UP DOWN UP UP
D400 UP DOWN UP DOWN UP UP
D800 DOWN UP UP DOWN UP UP
DC00 UP UP UP DOWN UP UP