Troubleshooting guide

Hardware configuration  27
How to configure Allen-Bradley cards
This section provides information on how to configure Allen-Bradley cards.
1784-KL
This card provides an interface from the Data Highway Plus (DH+) to the A-B
T47 programming terminal.
For more information on the 1784-KL, please refer to Data Highway Plus Local
Area Network Product Data, publication 1785-2.6.
TIP
It is not necessary to configure the 1784-KL card’s memory address or
interrupt for use with Rockwell Software products. The base address
and interrupt are not adjustable and are set as follows:
Series Base Address IRQ
A E000 None (the card uses Polled Mode)
B E000 2
IMPORTANT
Exclude memory addresses from E000 to E100 with your memory
management software. If you are using Windows, exclude the
memory addresses in the SYSTEM.INI file.