Troubleshooting guide

Hardware configuration  19
1770-KFC
This module provides an interface from RS-232C devices to the ControlNet
network. On the bottom of the module, there is a push button display that is used
to configure the communication parameters.
For more information on the 1770-KFC, please refer to ControlNet Communication
Interface Module User Manual, publication 1770-6.5.20.
Parallel Port
Network Access Port
RS-232C Port
ControlNet Port B BNC Connector
ControlNet Port A BNC Connector
Power Connector
Reset Switch
Fuse
Status LEDs
View ExitData
Save
Communication
Parameter
Current
Setting