Troubleshooting guide

18  Hardware Configuration Reference Guide
Communication Parameters (Factory Defaults)
DH485 Parameters
Parameter
Number
Parameter Factory Default
0 DH485 Node Address 00
1 DH485 Baud Rate 96 (9600 baud)
2 Diagnostic Command Execution 01 (the KF3 executes the
commands)
3 RS-232C Baud Rate 96 (9600 baud)
4 RS-232C Parity 00 (none)
5 DF1 Device Category 00 (full duplex)
RS-232C Parameters
Parameter
Number
Parameter Factory Default
6 Error Detection 00 (BCC)
7 Flow Control 00 (Disabled)
8 Duplicate Message Detection 01 (Enabled)
9 Sub-menu Parameters N/A
A Series and Revision N/A
Advanced Communication Parameters
Parameter
Number
Parameter Factory Default
0 Maximum Token Holder 31
1 Token Hold Factor 01
2 Number of Retries 02
3 DF1 ACK Timeout 10 (1.0 second timeout)
4 CTS to Transmit Delay 00 (no delay)
5 End of Message to RTS Off 00 (no delay)
6 Master Station Address 10 (octal)
7 Group Number 00