Troubleshooting guide

11
Chapter
Hardware configuration
This chapter provides basic configuration instructions for communication cards
and modules manufactured by either Allen-Bradley or S-S Technologies. There is
a Communication Links chart in this chapter for product comparison.
If you have any additional questions on your hardware, we suggest that you
contact the hardware manufacturer. If you have additional questions on
configuring your hardware for Rockwell Software products, please contact
Rockwell Software technical support.
How to use this chapter
1. Determine the type of communication interface card or module that you are
configuring.
2. Refer to the appropriate section of this chapter.
If you need additional information on your hardware, refer to the documentation
from the manufacturer. The Allen-Bradley and S-S Technologies publication
numbers are included in each section of this chapter and in Chapter 1 of this
document.
TIP
You may not have all the communication interface cards or modules
listed in this chapter. It is only necessary that you follow the instructions
for the type of communication interface card or module that will be
used in your system.
TIP
Not all software supports all hardware. If you foresee or encounter an
incompatibility problem, refer to your hardware and software
documentation for the solution or contact Rockwell Software technical
support.