Troubleshooting guide

Before using this document  3
What communication card or module am I using?
In this document, there is hardware configuration information on the following
modules and cards.
Modules Description
1770-KF2B Provides an interface from a RS-232C or RS-422A device to a
Data Highway (DH) or a Data Highway Plus (DH+) network.
1770-KF3 Allows the host computer on an RS-232C link to communicate
with SLC processors on a DH485 network.
1770-KFC Connects devices network that cannot communicate directly on
the link to a ControlNet network.
1770-KFD Allows connection from an IBM-compliant laptop, desktop, or
notebook computer to a DeviceNet network.
1785-KE Provides an interface between RS-232C devices to a Data
Highway Plus (DH+) network.
Cards Description
1784-KL Provides an interface from a PC bus to a Data Highway Plus
(DH+) network.
1784-KT Provides an interface from a PC bus directly to a PLC-5, PLC-3,
or PLC-2 processor, or over a Data Highway Plus (DH+)
network to a PLC-5 processor.
1784-KT2 Allows an IBM/PS2 personal computer workstation to
communicate directly to a PLC-5, PLC-3, or PLC-2 processor, or
over a Data Highway Plus (DH+) network to any processor.
1784-KTC/
KTCX
Allows a 16-bit ISA or a 32-bit EISA-compatible computer to
communicate on a ControlNet network.
1784-KTX/
KTXD/KTS
Allows the ISA/EISA PC bus to communicate with PLC or SLC
processors via a DH, DH485, or remote I/O network.
1784-PCMK Provides a PCMCIA communication interface between an IBM
compliant notebook computer and PLC and SLC processors.
5136-SD
(Rev 1 and 2)
Communicates from a PC bus to a Data Highway (DH) or Data
Highway (DH+) network.
5136-SD-MCA Communicates to a Data Highway (DH) or a Data Highway Plus
(DH+) network. (Direct-Link Interface card)