User Manual User guide

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 581
Appendix C
Error and Event Messages
This appendix lists the CLI error and event messages.
Conventions
System error messages are displayed in the format shown in this table.
Topic Page
Conventions 581
Software Auto Upgrade Messages 582
Association Management Messages 583
Unzip Messages 583
System Log Messages 584
802.11 Subsystem Messages 584
Inter-Access Point Protocol Messages 589
Local Authenticator Messages 589
WDS Messages 590
Mini IOS Messages 591
Access Point/Bridge Messages 591
Cisco Discovery Protocol Messages 591
External Radius Server Error Messages 591
LWAPP Error Messages 592
Sensor Messages 592
SNMP Error Messages 593
SSH Error Messages 593
Table 1 - Conventions for System Error Messages
Message Component Description Example
Error identifier A string categorizing the error. STATION-ROLE
Software component A string identifying the software component of the
error.
AUTO_INSTALL
Severity Level A numerical string indicating the severity of the
error.
0-LOG-EMERG—emergency situation, nothing is functional
1-LOG-ALERT—alerts user to a very serious problem
2-LOG-CRIT—warns of a possible serious critical error
3-LOG-ERR—warning of error condition, most features functional; exercise care
4-LOG-WARNING—warning that user can ignore if they prefer
5-LOG-NOTICE—notice that can be of concern to user
6-LOG-INFO—informational (not serious)
7-LOG-DEBUG—debug information (not serious)