User Manual User guide

56 Rockwell Automation Publication 1783-UM006A-EN-P - May 2014
Chapter 3 Stratix 5100 Device Manager Configuration Startup
The Summary Status page appears.
5. From the top menu, click Software.
The System Software screen appears.
6. Click System Configuration.
The System Configuration screen appears.
7. Click Reset to Defaults to reset all settings, including the IP address, to
factory defaults.
To reset all settings except the IP address to defaults, click Reset to
Defaults (Except IP).
You can reset the defaults by using CLI, see Reset Default Settings by
Using CLI on page 183.