User Manual User guide

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 429
Configuring RADIUS and TACACS+ Servers Chapter 14
61 NAS-Port-Type
79 EAP-Message
80 Message-Authenticator
(1) The access point sends the NAS-Identifier if attribute 32 (include-in-access-req) is configured.
Table 100 - Attributes Honored in Access-Accept Packets
Attribute ID Description
25 Class
27 Session-Timeout
64 Tunnel-Type
(1)
(1) RFC2868; defines a VLAN override number.
65 Tunnel-Medium-Type
1
79 EAP-Message
80 Message-Authenticator
81 Tunnel-Private-Group-ID
1
VSA (attribute 26) LEAP session-key
VSA (attribute 26) Auth-Algo-Type
VSA (attribute 26) SSID
Table 101 - Attributes Sent in Accounting-Request (start) Packets
Attribute ID Description
1User-Name
4 NAS-IP-Address
5NAS-Port
6Service-Type
25 Class
41 Acct-Delay-Time
44 Acct-Session-Id
61 NAS-Port-Type
VSA (attribute 26) SSID
VSA (attribute 26) NAS-Location
VSA (attribute 26) Cisco-NAS-Port
VSA (attribute 26) Interface
Table 99 - Attributes Sent in Access-Request Packets (Continued)
Attribute ID Description