User Manual User guide

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 413
Configuring RADIUS and TACACS+ Servers Chapter 14
The SSID can consist of up to 32 alphanumeric characters. SSIDs are case
sensitive.
dot11 ssid ssid-string
5. Enable RADIUS accounting for this SSID. For list-name, specify the
accounting method list.
See http://www.cisco.com/univercd/cc/td/doc/product/software/
ios122/122cgcr/fsecur_c/fsaaa/scfacct.htm#xtocid2 for more
information on method lists.
accounting list-name
6. Return to privileged EXEC mode.
end
7. Verify your entries.
show running-config
8. (Optional) Save your entries in the configuration file.
copy running-config startup-config
To remove the specified RADIUS server, use the no radius-server
host hostname | ip-address
global configuration command.
This example shows how to configure one RADIUS server to be used for
authentication and another to be used for accounting:
AP(config)# radius-server host 172.29.36.49 auth-
port 1612 key rad1
AP(config)# radius-server host 172.20.36.50 acct-
port 1618 key rad2
This example shows how to configure an SSID for
RADIUS accounting:
AP(config)# dot11 ssid batman
AP(config-ssid)# accounting accounting-method-list
This example shows how to configure host1 as the
RADIUS server and to use the default ports for both
authentication and accounting:
AP(config)# radius-server host host1
TIP
To enable accounting for an SSID, you must include the accounting command in the
SSID configuration. For a detailed description of the SSID configuration mode
accounting command:
http://www.cisco.com/en/US/products/hw/wireless/ps4570/
products_command_reference_chapter09186a008041757f.html#wp2449819.