User Manual User guide

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 395
Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection Services Chapter 13
5. Go to the SSID Manager page.
Figure 106 - SSID Manager Page
6. On the SSID that supports CCKM, choose these settings:
a. If your access point contains multiple radio interfaces, select the
interfaces that the SSID applies to.
b. Under Authentication Settings, choose Network EAP.
When you enable CCKM, you must enable Network EAP as the
authentication type.
c. Choose Mandatory or Optional under Authenticated Key
Management.
– If you select Mandatory, clients that support only CCKM can associate
by using the SSID.
– If you select Optional, both CCKM clients and clients that don’t
support CCKM can associate by using the SSID.