User Manual User guide

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 203
Administering the WAP Access Chapter 6
When the system prompts you to enter the enable password, you need not
precede the question mark with the Ctrl-V; you can simply enter abc?123 at the
password prompt.
4. Return to privileged EXEC mode.
end
5. Verify your entries.
show running-config
6. (Optional) Save your entries in the configuration file.
copy running-config startup-config
The enable password is not encrypted and can be read in the wireless device
configuration file.
This example shows how to change the enable password to l1u2c3k4y5. The
password is not encrypted and provides access to level 15 (traditional privileged
EXEC mode access):
AP(config)# enable password l1u2c3k4y5
TIP
Characters TAB, ?, $, +, and [ are invalid characters for passwords.