User Manual User guide

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 129
Stratix 5100 Device Manager Parameter Definitions Chapter 4
Local RADIUS Server
Usually an external RADIUS Server is used to authenticate users. In some cases,
this is not a feasible solution. In these situations, an access point can be made to
act as a RADIUS Server. Here, users are authenticated against the local database
configured in the access point. This is called a Local RADIUS Server feature. You
can also make other access points in the network use the Local RADIUS Server
feature on an access point.
Figure 53 - Local RADIUS Server Statistics Page
Table 38 - Local RADIUS Server Statistics Page Parameter Descriptions
Parameter Description
Blocks The number of times an authentication was ignored as a result of a username
being blocked because too many failed authentications had occurred.
Failures The number of authentications that failed for this user, generally because of a
bad password.
Network Access Server xx.xx.xx.xx Choose the network access server that you want to view. The network access
server is the access point configured to use the local RADIUS server as a backup
authenticator.
Successes The number of successful authentications.
User Name Displays the username of the active user.