User Manual User guide

ManualsBrandsRockwell Automation ManualsEquipment1783-WAPxxx Stratix 5100 Wireless Access Point

111

112

113

114

115

116

117

118

119

120

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 119

Stratix 5100 Device Manager Parameter Definitions Chapter 4

Set DataBeacon Rate (DTIM) These commands let you set the DataBeacon:

ap> enable

ap# configure terminal

ap(config)# interface ________

ap(config-if)# beacon dtim-period <value>

Set Infrastructure SSID When the access point is in repeater mode, this SSID is used to associate with a parent access point. Check the check box by the pull-down menu

if you want to force infrastructure devices to associate only to this SSID.

Guest Mode/Infrastructure SSID

Settings

Radio0-802.11N2.4 GHz, Set Beacon Mode, single BSSID Multiple BSSID, Set single Guest Mode SSID, Set Infrastructure SSID, Force

Infrastructure Devices to associate only to this SSID.

Table 32 - SSID Manager Parameter Descriptions (Continued)

Parameter Description