User Manual User guide

Rockwell Automation Publication 1783-UM006A-EN-P - May 2014 107
Stratix 5100 Device Manager Parameter Definitions Chapter 4
WDS
When you configure Wireless Domain Services on your network, access points
on your wireless LAN use the WDS device (either an access point, an Integrated
Services Router, or a switch configured as the WDS device) to provide fast,
secure roaming for client devices and to participate in radio management. Use
these parameters to identify if the interface is to be used as a Wireless Domain
Services (WDS).
See Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless
Intrusion Detection Services on page 375 for detailed configuration information.
Figure 45 - WDS (Wireless Domain Service) Status Page
This page provides an overview status of the wireless domain services you have
setup.
Table 26 - Wireless WSD/WNM General Setup Page Parameter Descriptions
Parameter Description
WDS Information
MAC Address The Media Access Control (MAC) address is a unique identifier assigned to the
network interface by the manufacturer.
IP Address IP address of the access points attempting to register with this wireless domain.
Priority Displays a priority number from 1…255 of this WDS candidate. The WDS candidate
with the highest priority number becomes the acting WDS.