User Manual User Manual

32 Rockwell Automation Publication 1783-UM001D-EN-P - January 2013
Chapter 2 Network Services Setup
4. Type your subnet and gateway addresses for the network.
5. Type the primary and secondary DNS server addresses.
The domain name is automatically populated if the 1783-EMS switch
resides on a domain.
6. Type an IP addresses for each port.
7. Click Apply Changes and cycle power for the changes to take effect.
DHCP Address Table
The DHCP Address table is populated when the server is set to assign an IP
address from a pool. This table details which IP address is assigned to a device.