User Manual User Manual

Rockwell Automation Publication 1783-UM001D-EN-P - January 2013 27
Network Services Setup Chapter 2
IGMP Configuration
Use these steps to configure IGMP.
1. From the navigation pane, expand the Network Services Setup folder and
select IGMP Configuration.
2. From the IGMP Snooping pull-down menu, choose Enabled to use IGMP
snooping.
When you enable IGMP snooping, additional configuration options
appear on the screen.
3. From the IGMP Version menu, choose version 1 or 2.
Version 2 is the default when IGMP snooping is enabled and is the
recommended setting. Per the IGMP definition, hosts and routers
implementing differing IGMP versions will interoperate correctly on the
network.