User Manual User Manual

20 Rockwell Automation Publication 1783-UM001D-EN-P - January 2013
Chapter 1 Basic Configuration
Status Indicators
The figures and table show the status indicators.
Item Indicator State Description
1Link state
(1)
(1) Appears on all copper Ethernet ports.
Solid green Ethernet link exists.
Flashing green Valid link is present and transmitting data.
2Data rate
(1)
Solid amber 100 Mbit link is present.
Off 10 Mbit link is present.
3 PWR Solid green Power to the switch is present.
4 STA Flashing green This heartbeat indicator normally flashes at a slow rate.
It flashes at a faster rate when the switch is being upgraded
or set back to factory default settings by using the button
on the back of the switch.
5 UPL Solid green Fiber transceiver present.
Flashing green Flashing indicates data is being transmitted over the
gigabit link on the 1783-EMS08T switch that has a gigabit
fiber transceiver on the bottom of the switch.
1783-EMS08T
1783-EMS04T
1
2
3
4
1
2
3
4
5