User Manual User guide
Rockwell Automation Publication 1783-UM004E-EN-P - June 2014 63
Switch Installation Chapter 2
5. Insert the ground screw into the functional ground screw opening on the
front panel.
6. Use a ratcheting torque screwdriver to tighten the ground screws and ring
terminal lugs to the switch front panel to 0.4 N
m (3.5 lbin).
Do not exceed the recommended torque.
7. Attach the other end of the ground wire to a grounded bare metal surface,
such as a ground bus, a grounded DIN rail, or a grounded bare rack.
32498