User Manual User guide

206 Rockwell Automation Publication 1783-UM004E-EN-P - June 2014
Chapter 5 Manage the Switch via the Studio 5000 Environment
Port Security
The Port Security feature applies only to Full firmware. For more information,
see
Port Security on page 97.
Table 36 - Port Security Tab Fields
Field Description
Port The port on which you want to enable or disable security.
Enable Check the checkbox to enable port security.
MAC Addresses The number of supported dynamic or static MAC addresses.
• Allowed—1…80.
• Dynamic—The number of MAC addresses (devices) currently connected to the port that are not manually (statically) defined.
• Static—The number of MAC addresses (devices) statically defined by using the Device Manager Web interface.
Note that this number must be greater than the sum of the static + dynamic for a given port. If you wish to set the number to less,
disconnect the appropriate devices and let their entries in the port security table time out.