Owner's manual

Symbols
**Empty**, 55, 515, 68, 614, 617,
618, 619, 622, 1111
A
Accumulated Value, data table, 46
Addition, applicaiton, 91
Addresses, 53
Arithmetic instrucitons, multiplication, 519
Arithmetic Instructions, 517, A10
Arithmetic instructions
addition, 518
division, 519
subtraction, 519
B
Bit, defined, 26
Bit Controlling Instrucitons
latch, 56
unlatch, 56
Bit Controlling Instructions, 55
energize, 55
Bit Examining Instructions, 55
Bit manipulation, 131
Bit monitor, 132
Block Transfer
application, 115
basic operation, 635
bidirectional, 119
buffering data, 641, 642
instruction, 635
multiple reads, 118
read, 640
Block transfer
instructions, A15
syntax, 637
write, 641
Block Transfer Read Instruction, 640
Block Transfer Write Instruction, 641
Branching Instruction, 56
nested, 57
Branching instruction, application, 84
Byte, defined, 41
C
Central Processing Unit, 25
Compare Instructions, 515
equal, 515
compare Instructions, less than, 516
compare instructions
get byte, 516
limit test, 516
Complete Mode, 622
Controls
programmable, 22
traditional, 21
Couner Instructions, timer/counter theory,
58
Counter, application, 91
Counter Instrucitons, counter reset, 514
Counter Instruction, cascading, 1114
Counter Instructions, 511, A8
down counter, 513
up counter, 512
Counter Reset Instruction, 514
D
Data Highway, 37
instruction, 46
Data Manipulation, 514
compare instructions, 515
transfer instructions, 514
Data manipulation, application, 91
Data Manipulation Instructions, A9
Data Monitor Display, Hexadecimal, Binary,
625
Data Monitor Mode Display, 624
Data Table, 26
areas, 46
factory configured, 43
Distributed Complete Mode, 622
Division, application, 519
Down Counter Instruction, 513
E
EAF EPROM, 11, 38
Index