User Manual
Assembly and Installation
Chapter 3
311
Before the Mini-PLC-2/15 Controller is mounted to an enclosure, the I/O
Chassis must be partly assembled. This involves setting the Switch Group
Assembly, installing keying bands and installing the Battery Pack. In addition,
if the side mounting configuration is used, the System Power Supply should be
mounted to the Chassis before the Chassis is mounted to the enclosure back
panel.
Figure 3.8
Ground
Bus Connection Details
Ground bus
Tapped hole
Ground lug
Bolt
Star washer
10116I
Figure 3.9
Ground Bus Connections
Ground Bus
Ground Bus Mounting
Grounding Electrode
Conductor to
GroundingElectrode System
Equipment
Grounding
Conductors
10117I
Ground Lug
Chassis PreAssembly