Instruction Manual

Hardware
Chapter 3
3-10
fifth row of keys
SHIFT
access function on top
half of keys that support
two functions
CANCEL
COMMAND
end current function
without saving
move cursor left
SHIFT – move cur -
sor left
SHIFT – move cur -
sor right
move cursor
right
( + )
enter 3digit add
(PUT)
enter put
(IOT)
enter immediate output
(ZCL)
enter zone control
last state
(RTR)
enter retentive timer reset
( )
enter output energize enter examine on
FORCE
ON
specify force off
0
enter a 0
FORCE
OFF
specify force off
5. Turn the power switch on the front of the industrial terminal to the
ON position.
6. After a short while the following display will appear.
DIAGNOSTICS PASSED
MODE SELECTION
KEYBOARD MODULE 1770-FDC SERIES B/E
FOR USE WITH
THE FOLLOWING
PROCESSORS:
INSERT
KEYTOP OVERLAY:MODE:
10 = PLC
= PLC-211
12 = ALPHANUMERIC
1770-KBA
1770-KCB
1770-KAA
PLC
MINI-PLC-2, PLC-2
MINI-PLC-2/15
PLC-2/20 (LP1)
PLC-2/20 (LP2)
PLC-2/30
SELECT DESIRED MODE?
11595
Select your desired processor mode by pressing 11 on the
1770-T3 terminal.
7. After initialization has been completed, select the processor mode of
operation using the keystrokes below: