Instruction Manual

Index
I–6
address delimiters, 1712
commands, 179, 1710
generating messages, 173
message control word, 1710
message delete, 1714
message index, 1714
message print, 1713
message report, 1713
message store, 1711
messages 1-6, 173
programming example, 1714
quick reference, C20
reset, 62
result address, 108
retentive timer on, 84
retentive timer reset, 84
return, 132
run time errors
block transfer, 148
diagnosing, 191
run/program mode, 311
S
scan
average time, 53
function, 51
sequence, 52
theory, 51
scan sequence, 29
search functions, 167, C17
searching, 166
sections, 22
selectable timed interrupt. See STI
sequencer input, 125
sequencer instruction
comparison with file instruction, 121
limitations, 123
mask, 122
quick reference, C13
sequencer input, 125
sequencer load, 1219
sequencer output, 1213
table, 121
sequencer load, 1219
sequencer output, 1213
sequencer table, 121
set, 62
single rung display, 169
square root, 1015
startup conditions, 183
STI
overview, 152
programming, 151
subroutine, 131, 134, 151
subroutine area, 48
subroutine instruction, quick reference,
C14
subtraction, 102, 1011
switch
assembly, 35
memory store, 33
power, 34
settings, 35
T
temperature conversions, 185
temporary end, 197
terminal strip, 35
three-digit math, 101
timer instruction
cascading, 184
quick reference, C8
retentive timer on, 84
retentive timer reset, 84
timer on/timer off delay, 82
timer on/timer off, 82
timer/counter storage, 24
total memory clear, 1612
traditional controls, 21
trailing edge one shot, 182
transfer instruction
equal to or greater than, 99
equal to or less than, 97
get, 91
get byte, 910
get byte/put, 911
greater than, 99
put, 92
troubleshooting
bit manipulation, 192
bit monitor, 192
contact histogram, 193
ERR message, 198
forcing, 195
quick reference, C25
run time errors, 191