Instruction Manual

Math Instructions
Chapter 10
1019
Figure 10.7
Optional
ladder diagram for BCD to Binary Conversion
Executive Aux
Function
Function Number:
Data Addr:
Result Addr:
13
010
060
Start
060
2DE
G
050
000
G
051
734
G
If the operand is greater than (+) 32 767, the result 7FFFh is displayed. If the
operand is more negative than (-) 32 767, the result 8001 is displayed at the
result address. All negative values are stored as 2’s complement.
Keystrokes: You enter instructions to perform a BCD to Binary EAF
conversion by performing the following steps.
The first group of steps you perform enters the branch for the result (term F).
1. Open the rung. Press the branch start key [
].
2. Press -[G]-.
3. Enter <address>.
4. Enter <data> if appropriate.
The second group of steps you perform enters the branch for the conversion
number (term E).
1. Press the branch start key [
].
2. Press -[G]-.
3. Enter <address>.
4. Enter <data> if appropriate.
5. Press -[G]-.
6. Enter <address>.
7. Enter <data> if appropriate.
8. Close the branches. press the branch end key [
].
9. Close the rung. Press [SHIFT][EAF].