Manual

5–1 1Configuring the Loops
Publication 17716.4.5 - January 1997
In the case that you are reconfiguring a loop or group of loops, you
may find it useful to first upload the old configuration values for that
module. Also, after downloading, you’ll want to verify that the PLC
processor received the correct information. To do so, at the L
oop
pull-down menu, select U
pload.
1. From the L
oop pull-down menu, select Upload.
Accessing the Upload function
You may also access the Upload function by pressing CTRL + U.
The Upload dialog box appears.
2. Select your desired upload source and click on OK.
Uploading Configuration
Values
"