Manual
5–10
Configuring the Loops
Publication
17716.4.5 - January 1997
Once you have entered the appropriate values at the Configuration
screen, you must download these parameter values. To do so:
1. From the L
oop pull-down menu, select Download.
Accessing the Download function
You may also access the Download function by pressing CTRL + D.
The Download dialog box appears.
If you choose: Then:
Download to PLC the configuration values are downloaded to the PLC
data table block. From there, the ladder logic
blocktransfers them to the TCM module.
Save to the disk file the configuration values are downloaded to the disk
file, from where they can be uploaded as needed.
2. Select either or both and click on OK.
To configure the loop, choose download to the PLC.
At this point the Download dialog box is removed from the
Configuration screen, and the module configuration is complete.
Downloading
Configuration Values
"