Manual

Chapter 7
Monitoring Status Data
7-23
Word DescriptionBits
63
0 Loop1 AutoTuning successful
• 0 = Autotuning was not successful for loop1
• 1 = Autotuning was successful in determining PID gains for loop1.
1 Loop2 AutoTuning successful
• 0 = Autotuning was not successful for loop2
• 1 = Autotuning was successful in determining PID gains for loop2.
2 Loop3 AutoTuning successful
• 0 = Autotuning was not successful for loop3
• 1 = Autotuning was successful in determining PID gains for loop3.
3 Loop4 AutoTuning successful
• 0 = Autotuning was not successful for loop4
• 1 = Autotuning was successful in determining PID gains for loop4.
4 Loop5 AutoTuning successful
• 0 = Autotuning was not successful for loop5
• 1 = Autotuning was successful in determining PID gains for loop5.
5 Loop6 AutoTuning successful
• 0 = Autotuning was not successful for loop6
• 1 = Autotuning was successful in determining PID gains for loop6.
6 Loop7 AutoTuning successful
• 0 = Autotuning was not successful for loop7
• 1 = Autotuning was successful in determining PID gains for loop7.
7 Loop8 AutoTuning successful
• 0 = Autotuning was not successful for loop8
• 1 = Autotuning was successful in determining PID gains for loop8.
8-15 Reserved.
64
0-7 Firmware Revision  In ASCII. (A thru Z)
8-15 Firmware Series  In ASCII. (A thru Z)
Words 1 thru 64 of the system status block are identified by the
mnemonics TMS01 thru TMS64 in ProSet 700 software.
To learn how to calibrate the temperature control module, read chapter 8.
What to do next