Manual

Monitoring Status Data

Chapter 7

7-22

Word DescriptionBits

6 Loop7 Low Deviation Alarm  (set in word 19 of the configuration block)

•0 = Loop7 PV input is above the low deviation alarm value.

•1 = Loop7 PV input is at or below the low deviation alarm value.

7 Loop8 Low Deviation Alarm  (set in word 19 of the configuration block)

•0 = Loop8 PV input is above the low deviation alarm value.

•1 = Loop8 PV input is at or below the low deviation alarm value.

8 Loop1 High Deviation Alarm  (set in word 20 of the configuration block)

•0 = Loop1 PV input is below the high deviation alarm value.

•1 = Loop1 PV input is at or above the high deviation alarm value.

9 Loop2 High Deviation Alarm  (set in word 20 of the configuration block)

•0 = Loop2 PV input is below the high deviation alarm value.

•1 = Loop2 PV input is at or above the high deviation alarm value.

10 Loop3 High Deviation Alarm  (set in word 20 of the configuration block)

•0 = Loop3 PV input is below the high deviation alarm value.

•1 = Loop3 PV input is at or above the high deviation alarm value.

11 Loop4 High Deviation Alarm  (set in word 20 of the configuration block)

•0 = Loop4 PV input is below the high deviation alarm value.

•1 = Loop4 PV input is at or above the high deviation alarm value.

12 Loop5 High Deviation Alarm  (set in word 20 of the configuration block)

•0 = Loop5 PV input is below the high deviation alarm value.

•1 = Loop5 PV input is at or above the high deviation alarm value.

13 Loop6 High Deviation Alarm  (set in word 20 of the configuration block)

•0 = Loop6 PV input is below the high deviation alarm value.

•1 = Loop6 PV input is at or above the high deviation alarm value.

14 Loop7 High Deviation Alarm  (set in word 20 of the configuration block)

•0 = Loop7 PV input is below the high deviation alarm value.

•1 = Loop7 PV input is at or above the high deviation alarm value.

15 Loop8 High Deviation Alarm  (set in word 20 of the configuration block)

•0 = Loop8 PV input is below the high deviation alarm value.

•1 = Loop8 PV input is at or above the high deviation alarm value.