Manual

Chapter 7
Monitoring Status Data
7-17
Word DescriptionBits
23
13 Loop8 CV Ramp Rate  (selected in bit 4 of word 3 of the configuration block)
•0 = Loop-8 CV is not ramping.
•1 = Loop8 CV is ramping at the rate entered in word 4 of the configuration block.
14 Loop8 Input High TC Range Alarm  (based on thermocouple type set in bits 12-15 of word 2 of the configuration block)
•0 = Loop8 PV input is below the high TCrange alarm value.
•1 = Loop8 PV input is at or above the high TCrange alarm value.
15 Loop8 Input Low TCRange Alarm  (based on thermocouple type set in bits 12-15 of word 2 of the configuration block)
•0 = Loop8 PV input is above the low TCrange alarm value.
•1 = Loop8 PV input is at or below the low TCrange alarm value.
24 0-15 Loop8 ConfigurationBlockError or GainsBlockError Word  Indicates the first configurationblock or gainsblock word
containing an outofrange value or incompatible bit selection. (See appendix B for details on locating errors.)
•0 = No error detected in configuration block or gains block for loop 8.
•1 thru 23 in the leastsignificant pair of digits = configurationblock error  (lowerdigits value = word containing error).
•1 thru 57 in the upper pair of digits = gainsblock error  (upperdigits value = word containing an outofrange value).
25 0-15 Loop8 DynamicBlockError Word or AutoTuning Error Code  Indicates the first dynamicblock word containing an
outofrange value or an autotuning error. (See appendix B for details on locating errors.)
•0 = No error detected in dynamic block or in autotuning for loop 8.
•1 thru 34 in leastsignificant pair of digits = dynamicblock error  (lowerdigits value = word containing outofrange value).
•65 thru 67 in the upper pair of digits = a code that indicates an autotuning error.
26
0 Loop1 Heat TPO Bit
1 Loop2 Heat TPO Bit
2 Loop3 Heat TPO Bit
3 Loop4 Heat TPO Bit
4 Loop5 Heat TPO Bit
5 Loop6 Heat TPO Bit
6 Loop7 Heat TPO Bit
7 Loop8 Heat TPO Bit
8 Loop1 Cool TPO Bit
9 Loop2 Cool TPO Bit
10 Loop3 Cool TPO Bit
11 Loop4 Cool TPO Bit
12 Loop5 Cool TPO Bit
13 Loop6 Cool TPO Bit
14 Loop7 Cool TPO Bit
15 Loop8 Cool TPO Bit