User Manual

Module Programming
Chapter 4
4–13
2. Set the 1771–ASB configuration switches, as shown in Figure 4.14.
Figure 4.14
1771-ASB Configuration Dip Switches
NOTE: The black area indicates where the switch should be pressed with
a pencil or other sharp instrument.
3. Set the 1771 Remote Backplane dip switch, as shown in Figure 4.15.
Figure 4.15
1771 Remote Backplane Dip Switch
NOTE: The black area indicates where the switch should be pressed with
a pencil or other sharp instrument.
The remote chassis is now configured for 2-slot addressing.