User Manual

Module Programming
Chapter 4
4–10
4. Set the 1771–ASB configuration switches, as shown Figure 4.10.
Figure 4.10
1771-ASB Configuration Dip Switches
NOTE: The black area indicates where the switch should be pressed with
a pencil or other sharp instrument.
5. Set the remote 1771 backplane dip switch, as shown in Figure 4.11.
Figure 4.1 1
1771 Remote Backplane Dip Switch
NOTE: The black area indicates where the switch should be pressed with
a pencil or other sharp instrument.
The remote chassis is now configured for 2-slot addressing.