User Manual

Module Programming
Chapter 4
4–9
2. Set the PLC–5/15 configuration dip switches, as shown in Figure 4.8.
Figure 4.8
PLC-5/15 Configuration Dip Switches
NOTE: The black area indicates the selected switch position (up or down).
3. Set the 1771 Backplane dip switch, as shown in Figure 4.9.
Figure 4.9
Backplane Dip Switches
NOTE: The black area indicates where the switch should be pressed with
a pencil or other sharp instrument.
The local chassis is now configured for 2-slot addressing.