Manual
4–12 Programming Error Codes
Publication
1771-6.5.126 – March 1998
Error Code
Description IPC ID = 9
0441 IPC41 is out of range.
When IPC03-B14 = 1, a non-zero IPC41 must be within INC45
≤ IPC41 ≤ INC46
0442 IPC42 is out of range.
If non-zero, IPC42 must be within INC41
≤ IPC42 ≤ INC42
0443 IPC43 is out of range.
if: then:
MCC13 and MCC14 IPC43 must be within 00000 ≤ IPC43 ≤ MCC14 – MCC13
are both non-zero
MCC13 is non-zero and IPC43 must be within 00000 ≤ IPC43 ≤ MCC10 – MCC13.
MCC14 is zero
MCC13 is zero and IPC43 must be within 00000 ≤ IPC43 ≤ MCC14 – MCC09.
MCC14 is non-zero
MCC13 and MCC14 IPC43 must be within 00000 ≤ IPC43 ≤ MCC10 – MCC09
are both zero
0445 IPC45 is out of range.
When IPC03-B14 = 1, a non-zero IPC45 must be within INC45
≤ IPC45 ≤ INC46
0446 IPC46 is out of range.
If non-zero, IPC46 must be within INC41
≤ IPC46 ≤ INC42
0447 IPC47 is out of range.
if: then:
MCC13 and MCC14 IPC47 must be within 00000 ≤ IPC47 ≤ MCC14 – MCC13
are both non-zero
MCC13 is non-zero and IPC47 must be within 00000 ≤ IPC47 ≤ MCC10 – MCC13.
MCC14 is zero
MCC13 is zero and IPC47 must be within 00000 ≤ IPC47 ≤ MCC14 – MCC09.
MCC14 is non-zero
MCC13 and MCC14 IPC47 must be within 00000 ≤ IPC47≤ MCC10 – MCC09
are both zero
0449 IPC49 is out of range.
When IPC03-B14 = 1, a non-zero IPC49 must be within INC45
≤ IPC49 ≤ INC46
0450 IPC50 is out of range.
If non-zero, IPC50 must be within INC41
≤ IPC50 ≤ INC42
0451 IPC51 is out of range.
When IPC03-B14 = 1, IPC51 must be within 00000
≤ IPC51 ≤ INC46
0452
IPC52 is out of range. Valid range is 00000 ≤ IPC52 ≤ INC42
0454
IPC54 is out of range. Valid range is INC45 ≤ IPC54 ≤ INC46
0455
IPC55 is out of range. Valid range is INC41 ≤ IPC55 ≤ INC42
0456 IPC56 is out of range. Valid range must be compatible with min/max ram (screw) position
limits (MCC09/MCC10) and min/max software travel limits (MCC13/MCC14)
0457 You have selected Pressure Limited Vel/Pos execution for the Injection Profile by
P 3- 1 = and P 3- = 1 ho ever P 57 i out o ran e.
I
P
C0
3-
B0
1 =
0
and
I
P
C0
3-
B00
= 1
;
ho
w
ever
,
I
P
C
57 i
s
out o
f
ran
g
e.
IPC57 must be within MCC17 < IPC57 ≤ MCC18
0458 You have selected Pressure Limited Vel/Pos execution for the Injection Profile by
IPC03-B01 = 0 and IPC03-B00 = 1.
IPC58 is out of range.
if: then:
MCC13 and MCC14 IPC58 must be within 00000 ≤ IPC58 ≤ MCC14 – MCC13
are both non-zero
MCC13 is non-zero and IPC58 must be within 00000 ≤ IPC58 ≤ MCC10 – MCC13.
MCC14 is zero
MCC13 is zero and IPC58 must be within 00000 ≤ IPC58 ≤ MCC14 – MCC09.
MCC14 is non-zero
MCC13 and MCC14 IPC58 must be within 00000 ≤ IPC58 ≤ MCC10 – MCC09
are both zero