User Manual

1–36 Abbreviated Command and Status Blocks
Publication 1771-6.5.88 – July 1997
End of Profile Set-output Values
TOC33
N43:449 Output #1
TOC34 N43:450 Output #2
TOC35 N43:451 Output #3
TOC36 N43:452 Output #4
TOC37 N43:453 Output #5
TOC38 N43:454 Output #6
TOC39 N43:455 Output #7
TOC40 N43:456 Output #8
Pressure Control Limits
TOC41 N43:457 Minimum limit
TOC42 N43:458 Maximum limit
TOC43 N43:459 % output for minimum
TOC44 N43:460 % output for maximum
Velocity Control Limits
TOC45 N43:461 Minimum limit
TOC46 N43:462 Maximum limit
TOC47 N43:463 % output for minimum
TOC48 N43:464 % output for maximum
Profile Tuning Constants
TOC49 N43:465 Proportional gain, pressure control
TOC50 N43:466 Integral gain, pressure control
TOC51 N43:467 Derivative gain, pressure control
TOC52 N43:468 Proportional gain, velocity control
TOC53 N43:469 Feedforward gain, velocity control
TOC54-56 N43:470-472 RFU
Setpoint for Profile Pressure Alarm
TOC57 N43:473 High pressure alarm
TOC58-64 N43:474-480 RFU
Word Pro-Set Address Description
Bit-mapped Status Words
CLS01 B34:0 Block ID 00001001 (lower byte)
CLS01 B34:0 Jog status (upper byte)
CLS02 B34:1 Status of profile execution
CLS03 B34:2 Miscellaneous status
CLS04 B34:3 Status of watchdog timers
CLS05-08 N43:601-604 RFU
ERC Actuals from Clamp Close Profiles
CLS09 N43:605 Segment 1 (first clamp close)
CLS10 N43:606 Segment 2 (first clamp close)
CLS11 N43:607 Segment 3 (first clamp close)
CLS12 N43:608 Segment 4 (second clamp close)
CLS13 N43:609 Segment 5 (second clamp close)
CLS14 N43:610 Segment 6 (second clamp close)
CLS15 N43:611 Segment 7 (third clamp close)
ERC Actuals from Clamp Open Profiles
CLS16 N43:612 Segment 8 (third clamp close)
CLS – Clamp and Eject
ERC Values Status Block