User Manual

1–25Abbreviated Command and Status Blocks
Publication 1771-6.5.88 – July 1997
Expert Response Compensation Percentage
PLC05
N44:361 ERC % minimum RPM
PLC06 N44:362 ERC % minimum pressure
PLC07 N44:363 RFU
Watchdog Timer
PLC08 N44:364 Profile timer preset
Set-output Values for Unselected Valves (During Profile)
PLC09 N44:365 Output #1
PLC10 N44:366 Output #2
PLC11 N44:367 Output #3
PLC12 N44:368 Output #4
PLC13 N44:369 Output #5
PLC14 N44:370 Output #6
PLC15 N44:371 Output #7
PLC16 N44:372 Output #8
Acceleration Ramp Rates
PLC17 N44:373 Output #1
PLC18 N44:374 Output #2
PLC19 N44:375 Output #3
PLC20 N44:376 Output #4
PLC21 N44:377 Output #5
PLC22 N44:378 Output #6
PLC23 N44:379 Output #7
PLC24 N44:380 Output #8
Deceleration Ramp Rates
PLC25 N44:381 Output #1
PLC26 N44:382 Output #2
PLC27 N44:383 Output #3
PLC28 N44:384 Output #4
PLC29 N44:385 Output #5
PLC30 N44:386 Output #6
PLC31 N44:387 Output #7
PLC32 N44:388 Output #8
End of Profile Set-output Values
PLC33 N44:389 Output #1
PLC34 N44:390 Output #2
PLC35 N44:391 Output #3
PLC36 N44:392 Output #4
PLC37 N44:393 Output #5
PLC38 N44:394 Output #6
PLC39 N44:395 Output #7
PLC40 N44:396 Output #8
Pressure Control Limits
PLC41 N44:397 Minimum limit
PLC42 N44:398 Maximum limit
PLC43 N44:399 % output for minimum
PLC44 N44:400 % output for maximum
RPM Control Limits
PLC45 N44:401 Minimum limit
PLC46 N44:402 Maximum limit