User guide

Important Information P1. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Manual
Objectives
P1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Audience P2
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Use
of T
erms P2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Related
Publications
P5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Overview of Inject, Clamp, and Eject Mode 11. . . . . . . . . . . .
Chapter
Objectives
11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Inject Control 11
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Clamp Control 19
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ejector Control 113
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
System Pressure 115
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Example
Hydraulic Circuits for the Inject, Clamp, and Eject Mode
116. .
Summary
of Inject, Clamp, and Eject Mode of Operation
120. . . . . . . .
Install the QDC Module 21. . . . . . . . . . . . . . . . . . . . . . . . . . .
Chapter
Objectives
21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Record
I/O Ranges
21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Set Module Jumpers 22
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Key
the I/O Chassis
25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Install
the QDC Module
26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Wire
I/O Devices
27. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Ground and Shield Your I/O Devices 29
. . . . . . . . . . . . . . . . . . . . . .
Plan for ESTOPs and Machine Interlocks 211
. . . . . . . . . . . . . . . . . .
Configure the QDC Module'
s I/O
31. . . . . . . . . . . . . . . . . . . .
Chapter
Objectives
31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Select Module Parameters and I/O Ranges 32
. . . . . . . . . . . . . . . . .
Determine Initial Sensorconfiguration Values 34
. . . . . . . . . . . . . . . .
Download MCC Parameters to the QDC Module 35
. . . . . . . . . . . . . .
Use Setoutput Operation to Move the Ram (screw),
Clamp, and Ejector 37
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Complete your Sensor Configuration 38
. . . . . . . . . . . . . . . . . . . . . .
Select
Optional Configurations
314. . . . . . . . . . . . . . . . . . . . . . . . . .
Table of Contents