Manual

Select Output 1 Range with bits 01, 00
Select Output 2 Range with bits 03, 02
Select Output 3 Range with bits 05, 04
Select Output 4 Range with bits 07, 06
Output Range
-10 to +10 vdc 0 0
0 to +10 vdc 0 1
4 to 20 mA 1 0
Not connected 1 1
Code:
Your value
Required initial value
loaded by ProSet 600
0 or 1
Configure the QDC Module's
Inputs and Outputs
Chapter 3
3-4
Worksheet 3C
Selecting Output Ranges for your V alves
Control W ord MCC04Bxx 15 14 13 12 11 10 09 08 07 06 05 04 03 02 01 00
ProSet 600 Addr. B35/bit 575 574 573 572 571 570 569 568 567 566 565 564 563 562 561 560
Value 1 1 1 1 1 1 1 1
Example: If you select 0-10 vdc for all four output ranges,
MCC04 = 11111111 01010101.
Important: Software input/output selections must match the jumper
settings for each respective input/output.