User Manual

Jog Your Machine
Chapter 5
5-9
Table 5.C
Enable
Bits for Screwrotate and Ejector Jogs
Command Block Word: ProSet 600 Address: Description:
DYC01B09 B34/393 Execute Screwrotate Jog
DYC01B14 B34/398 Execute Ejector Jog Advance
DYC01B15 B34/399 Execute Ejector Jog Retract
Table 5.D
Status
Bits for Screwrotate and Ejector Jogs
Status Block Word: ProSet 600
Address:
Description:
SYS01B09 B34/9 Screwrotate Jog in Progress
SYS01B14 B34/14 Ejector Jog Advance in Progress
SYS01B15 B34/15 Ejector Jog Retract in Progress
We provide a programming example (Figure 5.2) of assisted jog control for
instructional purposes only. Your application-specific programming may
vary significantly from this example.
Important: You may also need to develop ladder logic that changes the
direction of ejector travel hydraulically when you command the QDC
module to retract the ejector.