User Manual
Index
I–2
H
hold phase, overview, 18
I
I/O
auxiliary analog inputs, 21
record ranges, 21
I/O config procedures (optional)
digital input filter, 317
max pressure alarms, 316
software travel limits, 314
time delays, 316
I/O configuration procedures, 31
clamp position sensor, 310
clamp pressure sensor, 312
correct program errors, 36
download config values, 36
move screw and clamp, 37, 38
screw position sensor, 39
screw pressure sensor, 311
select I/O ranges, 32
select module parameters, 31
sensor config values, 33
sensor configuration, 38
inject mode, overview, 12
injection profile
example benefits, 14
overview, 13
inputs, 31
clamp position sensor, 310
clamp pressure sensor, 312
digital input filter, 317
max pressure alarms, 316
optional configurations, 314
screw position sensor, 39
screw pressure sensor, 311
select ranges, 32
sensor config values, 33
sensor configuration, 38
software travel limits, 314
time delays, 316
installation procedures
ground the QDC module, 29
install the QDC module, 26
jumper settings, 22
key the I/O chassis, 25
plan machine interlocks, 211
wire the QDC module, 27
J
jog procedures, 51
determine initial jog values, 52
download jog values, 54
jog the screw and clamp, 57
ladder logic for jogs, 55, 58
screw rotate & ejector, 57
jumper plugs
accessing, 22
location diagram, 23
settings, 24
K
key the I/O chassis, 25
L
ladder logic
assess requirements, 61
command/status bit tables, 62
screw and clamp jogs, 55
screw-rotate & eject jogs, 58
LEDs to troubleshoot, 111
logical bridges
clamp mode, 1029
inject mode, 1016
select, 84, 820, 826, 832
loop control
closed loop, 102
select open/closed, 85, 813, 821,
827, 833
low pressure close, overview, 112
LPC start position, 87, 1027
M
machine cycle, clamp, 110
machine cycle, inject, 12
machine interlocks, 211
mold open
dwell timer preset, 836
position setpoint, 834
mold protection, selection of, 84
mold safe
diagram, 87, 835
position setpoint, 86
O
offset, 1020
select sign, 812, 820, 826
value, 815, 821, 828
open slow, overview, 114