Instruction Manual

Enter Y our V alues Here
Blank Worksheets
Appendix A
A-15
W orksheet 7D (continued)
Plastication Configuration Block (PLC)
Control Word ProSet 600 Addr. Value Description Units
PLC05 N44:361 1000 Minimum RPM Control ERC Percentage Percent
8
PLC06 N44:362 1000 Minimum Pressure Control ERC Percentage Percent
8
PLC08 N44:364 0 Profile Watchdog Timer Preset Time
1
PLC09 N44:365 * Output #1 Setoutput Value During Profile Percent Signal Output
4
PLC10 N44:366 * Output #2 Setoutput Value During Profile Percent Signal Output
4
PLC11 N44:367 * Output #3 Setoutput Value During Profile Percent Signal Output
4
PLC12 N44:368 * Output #4 Setoutput Value During Profile Percent Signal Output
4
PLC17 N44:373 0 Output #1 Acceleration Ramp Rate During Profile Percent Signal Output per Second
5
PLC18 N44:374 0 Output #2 Acceleration Ramp Rate During Profile Percent Signal Output per Second
5
PLC19 N44:375 0 Output #3 Acceleration Ramp Rate During Profile Percent Signal Output per Second
5
PLC20 N44:376 0 Output #4 Acceleration Ramp Rate During Profile Percent Signal Output per Second
5
PLC25 N44:381 0 Output #1 Deceleration Ramp Rate During Profile Percent Signal Output per Second
5
PLC26 N44:382 0 Output #2 Deceleration Ramp Rate During Profile Percent Signal Output per Second
5
PLC27 N44:383 0 Output #3 Deceleration Ramp Rate During Profile Percent Signal Output per Second
5
PLC28 N44:384 0 Output #4 Deceleration Ramp Rate During Profile Percent Signal Output per Second
5
PLC33 N44:389 * Output #1 Setoutput Value at Endof Profile Percent Signal Output
4
PLC34 N44:390 * Output #2 Setoutput Value at Endof Profile Percent Signal Output
4
PLC35 N44:391 * Output #3 Setoutput Value at Endof Profile Percent Signal Output
4
PLC36 N44:392 * Output #4 Setoutput Value at Endof Profile Percent Signal Output
4
PLC41 N44:397 0 Pressure Minimum Control Limit Pressure
3
PLC42 N44:398 * Pressure Maximum Control Limit Pressure
3
PLC43 N44:399 * Selected Pressure Valve, Output for Minimum Percent Signal Output
4
PLC44 N44:400 * Selected Pressure Valve, Output for Maximum Percent Signal Output
4
PLC45 N44:401 0 RPM Minimum Control Limit RPM
2
PLC46 N44:402 * RPM Maximum Control Limit RPM
2
PLC47 N44:403 * Selected RPM Valve, Output for Minimum Percent Signal Output
4
PLC48 N44:404 * Selected RPM Valve, Output for Maximum Percent Signal Output
4
PLC49 N44:405 100 Proportional Gain for Pressure Control None
PLC50 N44:406 400 Integral Gain for Pressure Control Inverse Time (Algorithm)
6
PLC51 N44:407 0 Derivative Gain for Pressure Control Time (Algorithm)
7
PLC52 N44:405 100 Proportional Gain for RPM Control None
PLC53 N44:406 400 Integral Gain for RPM Control Inverse Time (Algorithm)
6
PLC54 N44:407 0 Derivative Gain for RPM Control Time (Algorithm)
7
PLC57 N44:413 0 Profile High Pressure Alarm Setpoint Pressure
3
1
Time
2
Screw Speed
3
Pressure
4
Percent Signal Output
00.00 to 99.99 seconds
000.0 to 999.9 RPM 0000 to 9999 PSI 00.00 to 99.99
000.0 to 999.9 Bar
5
Percent Signal Output per Second
6
Inverse T ime (Algorithm)
7
T ime (Algorithm)
8
Percent
0000 to 9999 00.00 to 99.99 Minutes (ISA) 00.00 to 99.99 Minutes (ISA) 00.00 to 99.99
00.00 to 99.99 Seconds (AB) 00.00 to 99.99 Seconds (AB)
* Refer to the appropriate section later in this chapter for information on this parameter