Instruction Manual

Preface
P-5
Take time now to familiarize yourself with the Reference Manual,
publication 1771-6.5.88. The five sections, in brief, include:
summary of each data block used by the QDC module
(abbreviated command and status blocks)
programming error codes returned by the QDC module for each data
block, and recommended procedures to correct these errors
detailed listing and explanation of each command word and bit used by,
and each status word and bit returned from, the QDC module
operational, mechanical, electrical, and environmental specifications
about your module
instructions to help you calibrate your QDC module
If you purchased Pro-Set 600 software, you also need the following:
Publication #: Use this documentation: To:
65006.5.11 ProSet 600 Software
Designer's Guide
Select the ProSet 600 software that matches
the requirements of your molding machine.
65006.5.12 ProSet 600 Software
Assembly Manual
Transfer your ProSet 600 software from a
floppy to your hard drive. Add overlays into
your PLC5 and PanelView application files.
65006.5.13 ProSet 600 Software
Overlay Installation Manual
Install ProSet 600 overlays into your
application files to obtain desired features.
65006.5.14 ProSet 600 Software
Customization Manual
Customize your ProSet 600 application to
your machinecontrol requirements.
65006.5.15 ProSet 600 Software
Reference Manual
Support customizing your software control
system.