Instruction Manual

Assembly and Installation
Chapter 2
228
Table 2.E
Customer
+ 15V dc Power Supply Requirements
Specifications +15 V olts 15 V olts
Output Current 100mA 100mA
Output V oltage T olerance 1% 1%
Regulation (type) Series Series
Line Regulation (for 10V AC input change) +0.2% +0.2%
Load Regulation (no load to full load) +1.0% +1.0%
Ripple 10mVpp 10mVpp
Overvoltage Protection [1] +18V dc 18V dc
Current Limit (percent of full load) 125% 125%
[1] The module is not protected from overvoltages from the customer power supply .
Table 2.F
+5V dc Power Supply (Optional) Requirements
Specifications +5Volts
V oltage (at wiring arm) 5.05V dc
Current 1.2A per PID module
V oltage Regulation Sum of all deviations due to line,
load, and ripple should not exceed
+ 0.15V dc
Rise T ime (to 4.75V dc) Less than 10msec