Instruction Manual

Summary Word and Bit Tables
Appendix D
D8
W67(W74)
READ FFV BCD + 9999 W61 (W68) B13
[2
[1}
The expanded features bir W01 B14 musr be set to use these features.
[2]
W ord and bit numbers such a W30(W50)B07,B06 are independent of the word nubmer at the top of the column.
Table D.C
Master Control W ord W01
Bit Title Status
B17,B16 Block identifier 0=not allowed
B15 Loop select 0=both loops
1=loop 1, only
B14 Standard/expanded features 0=standard
1=expanded
B13 Calibration 0=normal operation
1=calibration
B12 Binary/BCD format 0=BCD W05,W09,W10,W12,W16,W17
1=Binary W63,W64,W66,W70,W71,W73
B11 Set point format 0=BCD W06(W13)
1=binary
B10 Soft fault reset 0=reset
1=enable
B07 Loop time/diagnostic 0=loop time
1=diagnostic W60
B06 Load 0=reset
1=enable
B05,B04 Verify 0=normal operation
1=undefined
B03 Enter 0=reset
1=enable
B02 SET OUT2 0=reset
1=enable SET OUT2 in W12
B01 SET OUT1 0=reset
1=enable SET OUT1 in W05
B00 Set manual request 0=reset
1=enables contact output