Installation Instructions Owner's manual
5#,*$"4*/. 9 $4/#&2
Cat. No. 1771-IXE Series D
Use this document as a guide when installing the 1771-IXE series D
thermocouple/mV input module.
2&6&.4 ,&$42/34"4*$ *3$)"2(& &,/7
.%&234".% /-0,*".$& 4/ 52/0&". .*/. *2&$4*6&3
.%&234".% 2/%5$4 /-0"4*#*,*48
",$5,"4& /7&2 &15*2&-&.43
&4&2-*.& /%5,& ,"$&-&.4
&8 4)& "$+0,".& /..&$4/2
.34",, 4)& /%5,& ".% *&,% !*2*.( 2-
/..&$4 !*2*.( 4/ 4)& *&,% !*2*.( 2-
2/5.% 4)& )"33*3 ".% /%5,&
/.'*(52& 4)& /%5,&
&'"5,4 /.'*(52"4*/.
4"453 .%*$"4/23
2/5#,&3)//4*.(
0&$*'*$"4*/.3
)&2-/$/50,&- *.054 -/%5,& "$$52"$8
The thermocouple/mV input module is sensitive to electrostatic
discharge.
!
ATTENTION: Electrostatic discharge can damage
integrated circuits or semiconductors if you touch
backplane connector pins. Follow these guidelines
when you handle the module:
• Touch a grounded object to discharge static potential
• Wear an approved wrist-strap grounding device
• Do not touch the backplane connector or
connector pins
• Do not touch circuit components inside the module
• If available, use a static-safe work station
• When not in use, keep the module in its
static-shield bag
)*3 *$/. *3 53&% 7)&. "%%*4*/.",
*.'/2-"4*/. *3 "6"*,"#,& *. 4)&
05#,*$"4*/. 9
Installation Instructions