User Manual

Programming ExamplesB–4
3%,+&$2+.-  6 $5 
1. Enter the following rung:

 "
#" 

!
!
 





 
 
 !!




.4(0!/+2
 +1 2*( $''0(11 .) 2*(  " 20$-1)(0 )+,(
2. Press [F8],[F5] and enter N7:60 to display the configuration
block. The industrial terminal screen should like Figure B.3.
Figure B.3
Sample PLC-5 Data File (Hexadecimal Data)
''0(11







































The above data file would configure the module as follow:
• ”K” thermocouples on all inputs
• temperature scale of Celsius
• output data in BCD format
• real time sampling set to a 1 second scan rate
• all channel alarms ON
• all channel minimum alarm values set to –40
• all channel maximum alarm values set to +85
• all calibration values set to 0
3. Enter the data corresponding to your bit selections and add alarm
and calibration values, if so desired.
4. [ESC] returns you to the main menu.