Manual

Module Configuration
Chapter 4
4-6
Set appropriate bits in the BTW data file to enable the RTS mode. You can
select RTS periods ranging from 50 ms to 3.1 seconds in increments of
100ms for the 1771-IL/B. Refer to Table 4.E below for actual bit settings.
Note that the default mode of operation is implemented by placing all
zeroes in bits 11 through 15 (13 through 17 octal).
T able 4.E
Examples of Bit Settings for the Real T ime Sample Mode
Decimal Bits 15 14 13 12 11
mmP
Octal Bits 17 16 15 14 13
Sa
m
ple Ti
m
e
P
eriod
0 0 0 0 0 No RTS, Default settings: 50ms
0 0 0 0 1 100ms
0 0 0 1 0 200ms
0 0 0 1 1 300ms
0 0 1 0 0 400ms
0 0 1 0 1 500ms
0 0 1 1 0 600ms
0 0 1 1 1 700ms
0 1 0 0 0 800ms
0 1 0 0 1 900ms
0 1 0 1 0 1.0s
0 1 1 1 1 1.5s
1 0 1 0 0 2.0s
1 1 0 0 1 2.5s
1 1 1 1 0 3.0s
1 1 1 1 1 3.1s