Instruction Manual

Constructing a Data Highway or
Data Highway Plus Cable System
Chapter 3
3-23
d. Cut the blue conductor wire and the clear conductor wire to
approximately 0.35 inch (8.9 mm), as measured from the outside
surface of the insulating washer.
Cone Assembly
Insulating
Washer
18741
8.89mm
(0.35")
Conductor
Wires
e. Using wire strippers, strip approximately 0.10 inch
(2.5 mm) of insulation off the end of the blue conductor wire.
f. Using wire strippers, strip approximately 0.20 inch
(5.0 mm) of insulation off the end of the clear conductor wire.
5.0mm
(0.2")
Clear Conductor Wire
Blue Conductor Wire
2.5mm
(0.1")
Insulation
Insulating
Washer
Cone
Assembly
10807B
3. Solder the connector wires.
a. Bend the clear conductor wire so that it is at a right angle to the blue
conductor wire.
Clear
Conductor Wire
Blue
Conductor Wire
Cone
Assembly
18732