Owner manual

Chapter 2
Installing The Smart Transmitter Toolkit
2-2
A. Insert the STT disk into a floppy drive.
B. Start at the 6200 Main Menu and press these keys:
F7
File
Utils
To/From
Floppy
From Floppy
6200
Main Menu
Processor
Memory: Cut Rungs
F9 F2 F7
You see:
C. Use the cursor keys to highlight the STT100 file.
D. To select the STT100 file as the source of the copy,
press
F3 Select
Source
.
E. To begin the copy, press
F1 Begin
Oper
.
The operation is completed.
F. To return to the 6200 Main Menu, press
Esc Esc .
1. Copy STT Subroutine
File to the Hard Drive